Estimates key quantities in causal mediation analysis - including average causal mediation effects (indirect effects), average direct effects, total effects, and proportions mediated - in the presence of multiple uncausally related mediators. Methods are described by Jérolon et al., (2021) <doi:10.1515/ijb-2019-0088> and extended to accommodate survival outcomes as described by Domingo-Relloso et al., (2024) <doi:10.1101/2024.02.16.24302923>.

This package provides tools for working with medical coding schemas such as the International Classification of Diseases (ICD). Includes functions for comorbidity classification algorithms such as the Pediatric Complex Chronic Conditions (PCCC), Charlson, and Elixhauser indices.

An implementation of multiple maps t-distributed stochastic neighbor embedding (t-SNE). Multiple maps t-SNE is a method for projecting high-dimensional data into several low-dimensional maps such that non-metric space properties are better preserved than they would be by a single map. Multiple maps t-SNE with only one map is equivalent to standard t-SNE. When projecting onto more than one map, multiple maps t-SNE estimates a set of latent weights that allow each point to contribute to one or more maps depending on similarity relationships in the original data. This implementation is a port of the original Matlab library by Laurens van der Maaten. See Van der Maaten and Hinton (2012) <doi:10.1007/s10994-011-5273-4>. This material is based upon work supported by the United States Air Force and Defense Advanced Research Project Agency (DARPA) under Contract No. FA8750-17-C-0020. Any opinions, findings and conclusions or recommendations expressed in this material are those of the author(s) and do not necessarily reflect the views of the United States Air Force and Defense Advanced Research Projects Agency. Distribution Statement A: Approved for Public Release; Distribution Unlimited.

The stepwise variable selection procedure (with iterations between the forward and backward steps) can be used to obtain the best candidate final regression model in regression analysis. All the relevant covariates are put on the variable list to be selected. The significance levels for entry (SLE) and for stay (SLS) are usually set to 0.15 (or larger) for being conservative. Then, with the aid of substantive knowledge, the best candidate final regression model is identified manually by dropping the covariates with p value > 0.05 one at a time until all regression coefficients are significantly different from 0 at the chosen alpha level of 0.05.

Simultaneous multiple outcomes prediction based on revised stacking algorithms, which enables the integration of information from predictions of individual models. An implementation of methodologies proposed in our paper: Li Xing, Mary L Lesperance, Xuekui Zhang. (2019) Bioinformatics, "Simultaneous prediction of multiple outcomes using revised stacking algorithms" <doi:10.1093/bioinformatics/btz531>.

Fits the Multiple Random Dot Product Graph Model and performs a test for whether two networks come from the same distribution. Both methods are proposed in Nielsen, A.M., Witten, D., (2018) "The Multiple Random Dot Product Graph Model", arXiv preprint <arXiv:1811.12172> (Submitted to Journal of Computational and Graphical Statistics).

This package provides a hybrid of the K-means algorithm and a Majorization-Minimization method to introduce a robust clustering. The reference paper is: Julien Mairal, (2015) <doi:10.1137/140957639>. The two most important functions in package MajMinKmeans are cluster_km() and cluster_MajKm(). Cluster_km() clusters data without Majorization-Minimization and cluster_MajKm() clusters data with Majorization-Minimization method. Both of these functions calculate the sum of squares (SS) of clustering. Another useful function is MajMinOptim(), which helps to find the optimum values of the Majorization-Minimization estimator.

This package contains a set of tools for constructing and coercing into and from the "mdate" class. This date class implements ISO 8601-2:2019(E) and allows regular dates to be annotated to express unspecified date components, approximate or uncertain date components, date ranges, and sets of dates. This is useful for describing and analysing temporal information, whether historical or recent, where date precision may vary.

Simulate, manage, visualize, and analyze spatially and temporally explicit datasets of mating potential. Implements methods to calculate synchrony, proximity, and compatibility.Synchrony calculations are based on methods described in Augspurger (1983) <doi:10.2307/2387650>, Kempenaers (1993) <doi:10.2307/3676415>, Ison et al. (2014) <doi:10.3732/ajb.1300065>, and variations on these, as described.

This package provides new functions info(), warn() and error(), similar to message(), warning() and stop() respectively. However, the new functions can have a level associated with them, so that when executed the global level option determines whether they are shown or not. This allows debug modes, outputting more information. The can also output all messages to a log file.

This package provides a collection of functions for conducting a meta-analysis with mean differences data. It uses recommended procedures as described in The Handbook of Research Synthesis and Meta-Analysis (Cooper, Hedges, & Valentine, 2009).

Many times, you will not find data for all dates. After first January, 2011 you may have next data on 20th January, 2011 and so on. Also available dates may have zero values. Try to gather all such kinds of data in different excel sheets of a single excel file. Every sheet will contain two columns (1st one is dates and second one is the data). After loading all the sheets into different elements of a list, using this you can fill the gaps for all the sheets and mark all the corresponding values as zeros. Here I am talking about daily data. Finally, it will combine all the filled results into one data frame (first column is date and other columns will be corresponding values of your sheets) and give one combined data frame. Number of columns in the data frame will be number of sheets plus one. Then imputation will be done. Daily to monthly and weekly conversion is also possible. More details can be found in Garai and others (2023) <doi:10.13140/RG.2.2.11977.42087>.

Automatic marking of R assignments for students and teachers based on testthat test suites.

Calculate various indices, like Crude Migration Rate, different Gini indices or the Coefficient of Variation among others, to show the (un)equality of migration.

Clustering of data under a non-ignorable missingness mechanism. Clustering is achieved by a semi-parametric mixture model and missingness is managed by using the pattern-mixture approach. More details of the approach are available in Du Roy de Chaumaray et al. (2020) <arXiv:2009.07662>.

This package provides a lightweight package designed to facilitate statistical simulations through functional programming. It centralizes the simulation process into a single higher-order function, enhancing manageability and usability without adding overhead from external dependencies. The package includes ready-to-use functions for common simulation targets. A detailed example can be found on <https://github.com/ielbadisy/mcstatsim>.

This package contains functions to estimate the proportion of effects stronger than a threshold of scientific importance (function prop_stronger), to nonparametrically characterize the distribution of effects in a meta-analysis (calib_ests, pct_pval), to make effect size conversions (r_to_d, r_to_z, z_to_r, d_to_logRR), to compute and format inference in a meta-analysis (format_CI, format_stat, tau_CI), to scrape results from existing meta-analyses for re-analysis (scrape_meta, parse_CI_string, ci_to_var).

This package provides a function for the estimation of mixture of longitudinal factor analysis models using the iterative expectation-maximization algorithm (Ounajim, Slaoui, Louis, Billot, Frasca, Rigoard (2023) <doi:10.1002/sim.9804>) and several tools for visualizing and interpreting the models parameters.

Send server-side tracking data from R. The Measurement Protocol version 2 <https://developers.google.com/analytics/devguides/collection/protocol/ga4> allows sending HTTP tracking events from R code.

Conduct multi-locus genome-wide association study under the framework of multi-locus random-SNP-effect mixed linear model (mrMLM). First, each marker on the genome is scanned. Bonferroni correction is replaced by a less stringent selection criterion for significant test. Then, all the markers that are potentially associated with the trait are included in a multi-locus genetic model, their effects are estimated by empirical Bayes, and all the nonzero effects were further identified by likelihood ratio test for significant QTL. The program may run on a desktop or laptop computers. If marker genotypes in association mapping population are almost homozygous, these methods in this software are very effective. If there are many heterozygous marker genotypes, the IIIVmrMLM software is recommended. Wen YJ, Zhang H, Ni YL, Huang B, Zhang J, Feng JY, Wang SB, Dunwell JM, Zhang YM, Wu R (2018, <doi:10.1093/bib/bbw145>), and Li M, Zhang YW, Zhang ZC, Xiang Y, Liu MH, Zhou YH, Zuo JF, Zhang HQ, Chen Y, Zhang YM (2022, <doi:10.1016/j.molp.2022.02.012>).

The mlrMBO package can ordinarily not be used for optimization within mlr3', because of incompatibilities of their respective class systems. mlrintermbo offers a compatibility interface that provides mlrMBO as an mlr3tuning Tuner object, for tuning of machine learning algorithms within mlr3', as well as a bbotk Optimizer object for optimization of general objective functions using the bbotk black box optimization framework. The control parameters of mlrMBO are faithfully reproduced as a paradox ParamSet'.

The multiple instance data set consists of many independent subjects (called bags) and each subject is composed of several components (called instances). The outcomes of such data set are binary or categorical responses, and, we can only observe the subject-level outcomes. For example, in manufacturing processes, a subject is labeled as "defective" if at least one of its own components is defective, and otherwise, is labeled as "non-defective". The milr package focuses on the predictive model for the multiple instance data set with binary outcomes and performs the maximum likelihood estimation with the Expectation-Maximization algorithm under the framework of logistic regression. Moreover, the LASSO penalty is attached to the likelihood function for simultaneous parameter estimation and variable selection.

This package provides functions and tools for analysing consumer demand with the Almost Ideal Demand System (AIDS) suggested by Deaton and Muellbauer (1980).

Multivariable fractional polynomial algorithm simultaneously selects variables and functional forms in both generalized linear models and Cox proportional hazard models. Key references are Royston and Altman (1994) <doi:10.2307/2986270> and Royston and Sauerbrei (2008, ISBN:978-0-470-02842-1). In addition, it can model a sigmoid relationship between variable x and an outcome variable y using the approximate cumulative distribution transformation proposed by Royston (2014) <doi:10.1177/1536867X1401400206>. This feature distinguishes it from a standard fractional polynomial function, which lacks the ability to achieve such modeling.