ARM Trusted Firmware provides a reference implementation of secure world software for ARMv7-A and ARMv8-A, including a Secure Monitor executing at Exception Level 3 (EL3). It implements various ARM interface standards, such as:

1. The Power State Coordination Interface (PSCI)

2. Trusted Board Boot Requirements (TBBR, ARM DEN0006C-1)

3. SMC Calling Convention

4. System Control and Management Interface

5. Software Delegated Exception Interface (SDEI)

ARM Trusted Firmware provides a reference implementation of secure world software for ARMv7-A and ARMv8-A, including a Secure Monitor executing at Exception Level 3 (EL3). It implements various ARM interface standards, such as:

1. The Power State Coordination Interface (PSCI)

2. Trusted Board Boot Requirements (TBBR, ARM DEN0006C-1)

3. SMC Calling Convention

4. System Control and Management Interface

5. Software Delegated Exception Interface (SDEI)

ARM Trusted Firmware provides a reference implementation of secure world software for ARMv7-A and ARMv8-A, including a Secure Monitor executing at Exception Level 3 (EL3). It implements various ARM interface standards, such as:

1. The Power State Coordination Interface (PSCI)

2. Trusted Board Boot Requirements (TBBR, ARM DEN0006C-1)

3. SMC Calling Convention

4. System Control and Management Interface

5. Software Delegated Exception Interface (SDEI)

Assist novice developers when preparing a single package or a set of integrated packages to submit to CRAN. Provide additional resources to facilitate the automation of the following individual or batch processing: check local source packages; build local .tar.gz source files; install packages from local .tar.gz files; detect conflicts between function names in the environment. The additional resources include determining the identity and ordering of the packages to process when updating an imported package.

This package provides tools for geometric morphometric analyses and multidimensional data. Implements methods for morphological disparity analysis using bootstrap and rarefaction, as reviewed in Foote (1997) <doi:10.1146/annurev.ecolsys.28.1.129>. Includes integration and modularity testing, following Fruciano et al. (2013) <doi:10.1371/journal.pone.0069376>, using Escoufier's RV coefficient as test statistic as well as two-block partial least squares - PLS, Rohlf and Corti (2000) <doi:10.1080/106351500750049806>. Also includes vector angle comparisons, orthogonal projection for data correction (Burnaby (1966) <doi:10.2307/2528217>; Fruciano (2016) <doi:10.1007/s00427-016-0537-4>), and parallel analysis for dimensionality reduction (Buja and Eyuboglu (1992) <doi:10.1207/s15327906mbr2704_2>).

This package implements classical and contemporary utility-analysis methods for personnel selection, organised by criterion scale (classification or continuous/monetary) and selection structure (compensatory or multiple-hurdle). Methods include Taylor-Russell classification (Taylor and Russell, 1939, <doi:10.1037/h0057079>), Brogden-Cronbach-Gleser monetary utility (Brogden, 1949, <doi:10.1111/j.1744-6570.1949.tb01397.x>), Schmidt-Hunter-Pearlman intervention utility (Schmidt and others, 1979, <doi:10.1037/0021-9010.64.6.609>), Sturman comprehensive cascade (Sturman, 2001, <doi:10.1108/eb029072>), Thomas-Owen-Gunst multivariate classification (Thomas and others, 1977, <doi:10.3102/10769986002001055>), compensatory versus multiple-hurdle simulation (Ock and Oswald, 2018, <doi:10.1027/1866-5888/a000205>), AUC-to-effect-size conversions (Salgado, 2018, <doi:10.5093/ejpalc2018a5>), Pareto frontiers for validity-diversity trade-offs, and Monte Carlo uncertainty propagation.

With foundations on the work by Goutali and Chebana (2024) <doi:10.1016/j.envsoft.2024.106090>, this package contains various univariate and multivariate trend tests. The main functions regard the Multivariate Dependence Trend and Multivariate Overall Trend tests as proposed by Goutali and Chebana (2024), as well as a plotting function that proves useful as a summary and complement of the tests. Although many packages and methods carry univariate tests, the Mann-Kendall and Spearman's rho test implementations are included in the package with an adapted version to hydrological formulation (e.g. as in Rao and Hamed 1998 <doi:10.1016/S0022-1694(97)00125-X> or Chebana 2022 <doi:10.1016/C2021-0-01317-1>). For better understanding of the example use of the functions, three datasets are included. These are synthetic data and shouldn't be used beyond that purpose.

The udder quarter infection data set contains infection times of individual cow udder quarters with Corynebacterium bovis (Laevens et al. 1997 <DOI:10.3168/jds.S0022-0302(97)76295-7>). Obviously, the four udder quarters are clustered within a cow, and udder quarters are sampled only approximately monthly, generating interval-censored data. The data set contains both covariates that change within a cow (e.g., front and rear udder quarters) and covariates that change between cows (e.g., parity [the number of previous calvings]). The correlation between udder infection times within a cow also is of interest, because this is a measure of the infectivity of the agent causing the disease. Various models have been applied to address the problem of interdependence for right-censored event times. These models, as applied to this data set, can be found back in the publications found in the reference list.

Ecological alteration of degraded lands can improve their sustainability by addition of large amount of biomass to soil resulting in improved soil health. Soil biological parameters (such as carbon, nitrogen and phosphorus cycling enzyme activity) are reactive to minute variations in soils [Ghosh et al. (2021) <doi:10.1016/j.ecoleng.2021.106176> ]. Hence, biological activity index combining Urease, Alkaline Phosphatase, Dehydrogenase (DHA) & Beta-Glucosidase activity will assist in detecting early changes in restored land use systems [Patidar et al. (2023) <doi:10.3389/fsufs.2023.1230156>]. This package helps to calculate Biological Activity Index (BAI) based on vectors of Land Use System/treatment and control/reference Land Use System containing four values of Urease, Alkaline Phosphatase, DHA & Beta-Glucosidase. (DHA), urease (URE), fluorescein diacetate hydrolysis (FDA) and alkaline phosphatase (ALP) activities are measured in soil samples using triphenyl tetrazolium chloride, urea, fluorescein diacetate and p-nitro phenyl-phosphate as substrates, respectively.

This package provides a clustering approach applicable to every projection method is proposed here. The two-dimensional scatter plot of any projection method can construct a topographic map which displays unapparent data structures by using distance and density information of the data. The generalized U*-matrix renders this visualization in the form of a topographic map, which can be used to automatically define the clusters of high-dimensional data. The whole system is based on Thrun and Ultsch, "Using Projection based Clustering to Find Distance and Density based Clusters in High-Dimensional Data" <DOI:10.1007/s00357-020-09373-2>. Selecting the correct projection method will result in a visualization in which mountains surround each cluster. The number of clusters can be determined by counting valleys on the topographic map. Most projection methods are wrappers for already available methods in R. By contrast, the neighbor retrieval visualizer (NeRV) is based on C++ source code of the dredviz software package, and the Curvilinear Component Analysis (CCA) is translated from MATLAB ('SOM Toolbox 2.0) to R.

Documentation at https://melpa.org/#/org-re-reveal-citeproc

rxhash is a Go library for creating a unique hash value for struct in Go with data consistency.

rxhash is a Go library for creating a unique hash value for struct in Go, but data consistency.

Normalized gene expression data from rheumatic diseases from study published by Wollbold et al. in 2009, provided as an eSet.

Store minor allele frequency data from the Genome Aggregation Database (gnomAD exomes release 2.1) for the human genome version hs37d5.

Store minor allele frequency data from the Genome Aggregation Database (gnomAD exomes release 2.1) for the human genome version GRCh38.

This RSpec plugin allows you to use block_is_expected similarly to how you would use is_expected if a block was wrapping the subject.

Package retry provides a framework for retrying actions. It does not itself invoke the action to be retried, but is intended to be used in a retry loop.

Documentation at https://melpa.org/#/universal-sidecar-roam

Documentation at https://melpa.org/#/visual-regexp-steroids

This package provides a linter for the reStructuredText format.

Easy access to variables from HTTP requests